
- Features
- Specifications
- Accessories
SV series vertical machining centre is designed for Mold & Die Industry. 3 axes are adopted roller type linear guide ways to realize the best reliability and to ensure the highest performance on speed, precision, and rigid cutting requirements. Combining surface between spindle and motor are through scraping to ensure spindle performance and accuracy.
- One-piece casting for axial bearing housing, XYZ axes with motor direct-driven ball-screw to make sure high positioning accuracy
- Z axis with non-counter balance driven to ensure high acceleration transmission (Ball-bar test less than 0.01mm)
- Roller type linear guide way, loading and rigidity are 30% higher than other C type machine with ball bearing type
Friendly Operation
- Front large door for easily loading work piece, wider visible zone for easily watching cutting status
- Sliding doors at both sides allow less space occupation and ensure no chips or coolant to splash out during operation
- Reinforced glass safety protection
- Stainless cover, prolonged machine life time
- Various usages, a storage space locating under operation panel allows user easy to put their objects; movable chip conveyor allows user’s working requirement
- Convenient coolant and pneumatic interface, front location of coolant / pneumatic interface lets user easily to operate
Model | Unit | SV-855 | SV -966 | SV -1166 | SV -1266 | |
X axis | mm | 850 | 900 | 1,100 | 1,200 | |
Y axis | mm | 550 | 600 | 600 | 600 | |
Z axis | mm | 550 | 600 | 600 | 600 | |
X axis span / guide width | mm | 350 /#35 | 325 /#35 | |||
Y axis span / guide width | mm | 605 /#45 | 650 /#45 | |||
Z axis span / guide width | mm | 450 /#45 | 450 /#45 | |||
X / Y / Z diameter | mm | Φ40 | Φ40 | Φ40 | Φ45/Φ40/Φ40 | |
Pitch | mm | 12 | 12 | |||
Dimension | mm | 1,000×510 | 1,000×550 | 1,200×550 | 1,400×610 | |
Max. loading | kg | 500 | 600 | 700 | 800 | |
Max. speed | rpm | 10000 / 12000 | 10000 / 12000 / 15000 | |||
Type | type | Direct-driven | Direct-driven | |||
Motor power(Cont./30min rated) | kW | 7.5 / 11 | 7.5 / 11 | |||
X / Y / Z axis servo motor | kW | 2 / 2 / 3.5 | 2 / 2 / 3.5 | |||
Taper | type | BT40 | BT40 | |||
Front bearing diameter | mm | 70 | 70 | |||
Cutting feed rate | m/min | 1-10 | 1-10 | |||
Rapid traverse(X / Y / Z axis) | m/min | 36 / 36 / 30 | 36 / 36 / 30 | |||
ATC type | Arm type | Arm type | ||||
Tool magazine capacity | pcs | 24/32 | 24/32 | |||
Tool weight | kg | 7 | 7 | |||
Tool length | mm | 250 | 250 | |||
Tool changing time (T to T) | sec | 1.8 | 1.8 | |||
Power | kVA | 30 | 30 | |||
Pneumatic | kg/cm2 | 6 | 6 | |||
Machine net weight | kg | 5500 | 5800 | 6000 | 6800 |
Standard Accessory & Function
- FANUC 0i MF
- 10,000 rpm/#40/direct driven
- 24 T arm type ATC
- Spindle air blast
- Spindle cooler
- Nozzle coolant
- Tool loading switch
- Operation panel
- Centralized auto lubrication system
- Full enclosed guard with roof
- Working lamp
- 3 color signal lamp
- water gun and pneumatic interface
- Cutting coolant system
- MPG
- RJ45
- Heat exchanger for electrical cabinet
- Absolute encoder in XYZ axis
- Spindle loading protection by software
- Remote control software-standard version (not for Fargo NC)
- Auto power off
- VW-FX100 (Fanuc Only)
- 10.4〞LCD/MDI
- Foundation pads and bolts
- Tool box
- Manuals
Optional Accessory & Function
- MISTUBISHI M70/HEIDENHAIN iTNC 620
- 12,000/15,000rpm/♯40/direct driven
- 32 T arm type ATC
- CTS 20/50bar
- Tool holder interface reservation/5/20 bar
- oil skimmer
- Chip flushing system
- Air conditioner
- XYZ linear scales
- Auto tool length measurement unit
- Auto work piece measurement unit
- Rotary table(the 4th axis)/ Interface reservation
- Chip conveyor & Chip cart
- Remote control software-advance version (not for Fargo NC)
- Z axis retract function at power failure
- Transformer
- Auto warm up